A Swiss Army knife for the audio engineer!

ART constructed the Phantom I Active Direct Box to serve a multitude of needs in the studio and onstage:

Problem: You need to connect an amplifier's speaker output to the mic input on a mixer.

Solution: Connect a Phantom I between the speaker output and a mic input with phantom power on the mixer, then set the attenuation switch to —40dB.

Problem: Your PA is humming because there is a ground loop between a signal source and the mixer.

Solution: Connect a Phantom I between the signal source and a mic input with phantom power and set the ground switch to Lift.

Problem: You need to connect an unbalanced line-level source (i.e., a synthesizer, another mixer, an effects device, etc.) to a mic input on the mixer.

Solution: Connect a Phantom I between the source and a mic input with phantom power and set the Attenuator switch to —20dB.

The Phantom I is not a phantom power supply, it is an active direct box that operates on phantom power.

ART Phantom l Active Direct Box Features:

• Attenuator switch provides 2 pad levels: -20dB and -40dB
• Switch-based ground-lift capability
• Dual 1/4" unbalanced inputs are parallel so one can be used as a thru jack
• XLR balanced output
• Active LED indicates presence of phantom power

Put the Phantom I in your tool kit and be ready to solve those studio and stage problems. Order today!

ART Phantom l Active Direct Box Specifications:

• Input level: -10dB to +40dB
• Output level: -10dB to +2dB
• Frequency range: 1Hz-50kHz
• S/N ratio: 100dB
• Power: 9-48V DC of phantom power

ART Phantom l Active Direct Box

We're sorry, this product has been discontinued.

Gold Coverage Protection Warranty: (What's this?)