Designed to clip to brass, reeds, piano, snare, toms, and violin.

Supplied with Audio-Technica's versatile UniMount clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs.

It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.

Requires phantom power.

Audio-Technica ATM350 CONDENSER INSTRUMENT MIC Features:

• Low-profile design for minimum visibility
• UniMount clip permits accurate positioning, provides shock resistance and protects element
• Unique violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpiece
• Crisp, clear, well-balanced response, even at high SPLs
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Interchangeable elements available for hypercardioid and omnidirectional polar patterns
• Corrosion-resistant contacts from gold-plated XLRM-type connector
• Rugged, all-metal design and construction for years of trouble-free use

Audio-Technica ATM350 CONDENSER INSTRUMENT MIC Includes:

• AT8542 power module; AT8418 UniMount microphone instrument mount; AT8468 violin mount; soft protective pouch

When you need great sound but don't have the room for big mics and stands, clip on an ATM350 for crisp clear sound.

Audio-Technica ATM350 CONDENSER INSTRUMENT MIC Specifications:

• ELEMENT: Fixed-charge back plate permanently polarized condenser
• POLAR PATTERN: Cardioid
• FREQUENCY RESPONSE: 40-20,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY: —49 dB (3.5 mV) re 1V at 1 Pa
• IMPEDANCE: 50 ohms
• MAXIMUM INPUT SOUND LEVEL: 149 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (TYPICAL) : 122 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 67 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 11-52V DC, 3.5 mA typical
• SWITCH: Flat, roll-off
• WEIGHT (MICROPHONE): 14.5 g (0.5 oz)
• WEIGHT (POWER MODULE): 81.2 g (2.9 oz)
• DIMENSIONS (MICROPHONE): 37.8 mm (1.49") long, 12.2 mm (0.48") diameter
• DIMENSIONS (POWER MODULE): 92.9 mm (3.66") long,18.9 mm (0.74") diameter
• OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
• CABLE: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector
• ACCESSORIES FURNISHED: AT8542 power module; AT8418 UniMount microphone instrument mount; AT8468 violin mount; soft protective pouch
• AUDIO-TECHNICA CASE STYLE: M36

Audio-Technica ATM350 CONDENSER INSTRUMENT MIC