2 of Audio-Technica's renowned 40 Series studio condenser mics.

The Audio-Technica AT4040SP Studio Pack offers you two of A-T's renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser mic and the AT4041 cardioid condenser.

Each microphone is transformerless, resulting in exceptional transient response, and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. Audio-Technica includes a shock mount, stand clamp and windscreen along with a protective wooden carrying case with this mic pack. Requires phantom power.

Audio-Technica AT4040SP Studio Microphone Pack Features:

• AT4040SP Studio Pack includes:
  
• The AT4040 side-address cardioid condenser microphone
• The AT4041 cardioid condenser microphone
• The AT8449 shock mount,
• The AT8405a stand clamp
• The AT8159 windscreen
• A protective wooden storage case
• About the AT4040 Side-address cardioid condenser microphone:
• Technically advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
• Externally polarized (DC bias) true condenser design
• Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
• Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Switchable 80 Hz hi-pass filter and 10 dB pad
• AT4041Cardioid condenser microphone:
• Smooth, extended frequency response with a slight rise occurring in the high-frequency region
• Ideal for drum overheads, acoustic guitar, piano, horns and under snare
• Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• State of the art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
• Switchable hi-pass filter and rugged turned-brass microphone housing

Why wait to get your studio rolling with this incredible Mic Pack! Order this today!

Audio-Technica AT4040SP Studio Microphone Pack Specifications:

• The AT4040 Specs:
• ELEMENT: Externally-polarized (DC bias) condenser
• POLAR PATTERN: Cardioid
• FREQUENCY RESPONSE: 20-20,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa
• IMPEDANCE: 100 ohms
• MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.;
• 155 dB SPL, with 10 dB pad (nominal)
• NOISE: 12 dB SPL
• DYNAMIC RANGE (typical): 133 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typical
• SWITCHES: Flat, roll-off;
• 10 dB pad (nominal)
• WEIGHT: 12.7 oz (360 g)
• DIMENSIONS: 6.69" (170.0 mm) long,
• 2.10" (53.4 mm) maximum body diameter
• OUTPUT CONNECTOR: Integral 3-pin XLRM-type
• ACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
• AUDIO-TECHNICA CASE STYLE: R1
• The AT4041 Specs:
• ELEMENT: Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN: Cardioid
• FREQUENCY RESPONSE: 20-20,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY: -36 dB (15.8 mV), re 1V at 1 Pa
• IMPEDANCE: 100 ohms
• MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (typical): 121 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 48V DC, 3.2 mA typical
• SWITCH: Flat, roll-off
• WEIGHT: 4.2 oz (120 g)
• DIMENSIONS: 6.28" (159.5 mm) long,
• 0.83" (21.0 mm) body diameter
• OUTPUT CONNECTOR: Integral 3-pin XLRM-type
• ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
• AUDIO-TECHNICA CASE STYLE: S1

Audio-Technica AT4040SP Studio Microphone Pack

Audio-Technica AT4040SP Studio Microphone Pack