Crown remains at the front of the power amp pack with their XLS Series!

840W/ch @ 2 ohms, 600W/ch @ 4 ohms, 380W/ch @ 8 ohms, 1,680W bridged mono @ 4 ohms, 1,200W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price.

Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; XLR inputs and Speakon or binding post outputs; all in a rugged steel chassis designed to handle serious road use.

Crown XLS 602D Power Amplifier Features:

• Features sophisticated protection circuitry
• 5-way fault indicator
• Red peak clip LED on each channel
• Green signal-present LED that flashes when the level is extremely low
• Detented level controls
• Mode select switch for stereo or bridged
• 3-speed fan
• XLR inputs; touchproof binding post and Speakon outputs
• All in a rugged steel chassis designed to handle serious road use
• 3-year no-fault warranty

Crown amps are the royalty of the pro audio world. Order now!

Crown XLS 602D Power Amplifier Specifications:

• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V.
  
  Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, —0.8dB
  
  Signal-to-Noise Ratio (20 Hz to 20 kHz)_A-weighted, below rated power: _>98 dB. _No weighting, below rated power: _>93 dB.
  
  Total Harmonic Distortion (THD): <0.5%.
  
  Intermodulation Distortion (IMD):_(60 Hz and 7 kHz at 4:1) from full rated output to —40 dB: < 0.3%.
  
  Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
  
  Crosstalk (below rated power)_at 1 kHz: —76 dB. at 20 kHz: —58 dB.
• Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
• Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono.
  
  AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC
  
  29.0 lbs.

Crown XLS 602D Power Amplifier

Write A Review

Average of 4 User Ratings

Overall

Quality

Features

Value

Customer Reviews

Overall

Quality

Features

Value

Crown XLS series purchasing note

Posted by Proshow from Erie PA on Jul 10, 2009

Experience w/product: I own it

Reviewer's Background: DJ

Reviewer's Play Style: You name it

This is a great amp, very solid built and clear as can be, I puchased the 402 and it worked great for a few jobs, however it was a bit weak pushing 2 600w,rms 15's, in a open ported cab and 2 100w horn drivers. So I traded it in for the 602 I did notice a little more kick, but I still had the E.Q up almost the same high trim level to push the cabs. Not much difference. I recomend the 802 if your pushing anything bigger. But the 602 does a nice job.

Overall

Quality

Features

Value

Meaty amp!

Posted by Enorc from Pittsburgh PA on Feb 20, 2009

Experience w/product: I own it

Reviewer's Background: semi-pro musician

Reviewer's Play Style: Hippie jammy rock

I have a 602B (a few models old) I believe. An excellent amp providing plenty of power. I have run it in fields off of generators, in clubs with dodgy power, in the sun, under a tarp in the rain, in clubs and bars, you name it. This amp doesn't have any of the bells and whistles that other amps do, like builtin x-overs or the like, but it has the one thing you can't live without - you can hit the power switch, and so far after 4 years of ownership and regular use, it powers up and runs in all conditions every time.

I used to run a pair of s115V's with it in bridged mono, at full output, for several hours at a time. When it gets too hot, or gets power spiked, instead of melting down the protection circuitry just cuts power. Only had this happen a handful of times, but it's nice to know the amp takes care of itself. For the price, it can't be beat. I'm ordering another one today.

Overall

Quality

Features

Value

A great amp.

Posted by WSparksNV from Sparks, NV on Oct 13, 2007

Experience w/product: I own it

Reviewer's Background: Active Musician

Reviewer's Play Style: All types

Just purchased 2 XLS620's and my expectations have been exceeded. Great transparent sound at all volume levels, pushing Yamaha S115Vs and two Peavy 18" subs, with a DBX crossover in between. These amps are very quiet (including the fans). They can get very loud and I have not even gotten them to clip. I do a one man band and DJ gig. It is obvious these amps are very high quality, and are built very well.

Overall

Quality

Features

Value

Finally

Posted by Phone Booth Superheroes from chico ca on Sep 15, 2007

Experience w/product: I own it

Reviewer's Background: semi pro

Reviewer's Play Style: rock/punk

I went through enough crap amps like behringer and nady. I finally got sick of it and bought this 602. Best purchase I've made. Crown actually provides you with the amount of amps it says unlike behringer with its 1200w that sounds like 200w. I power two 15's and two 12's with easy and clarity for vocals and music mix. Planning on buying another soon for my sub-woofer im buying.

If you would like to write a review, please see our product review guidelines.

Crown XLS 602D Power Amplifier

Read 4 Reviews