Adds up to 16 ADAT Lightpipe I/O to Lynx Aurora 8 and 16 converters with a 48kHz sampling rate.

The Lynx LT-ADAT Aurora card is an LSlot ADAT card specifically for Lynx's Aurora 8 and Aurora 16 converters (sold separately) that adds up to 16 channels of high-performance ADAT Lightpipe input and output. The LT-ADAT is a full-function ADAT interface that provides 2 ADAT Lightpipe inputs and 2 outputs. Operating at a sample rate of 48kHz, the Lynx LT-ADAT has 16 I/O channels. Higher sample rates are supported using S/MUX technology: 8 channels at 96kHz and 4 channels at 192kHz.

Easily installed inside the Lynx Aurora 16 and Aurora 8, the LT-ADAT connects via ribbon cable to the host converter. Channel routing is controlled from the Aurora front panel or by computer via the Lynx AES16 PCI card. The LT-ADAT clock can be slaved to Aurora or a Lightpipe optical signal. Even when slaving to Lightpipe, Aurora's SynchroLock technology provides immunity to the high levels of jitter sometimes found in optical signals.

Lynx LT-ADAT also allows Aurora to function as a bi-directional format converter, converting ADAT to AES/EBU and analog and back to ADAT.

Lynx LT-ADAT Aurora ADAT card Features:

• Adds 16 Lightpipe I/O channels at up to 48 kHz to Aurora converters
• Higher sample rates attainable via S/MUX technology
• Easily installed into Aurora's LSlot bay
• Controlled via Aurora front panel or by computer via AES16.
• ADAT/AES-EBU bidirectional format converter
• Flexible clocking options
• FPGA core allows field upgraded of firmware
• RoHS compliant

Give your Aurora converter more versatility with this ADAT card. Order one today!

Lynx LT-ADAT Aurora ADAT card Specifications:

• General
• Host interface: Lynx proprietary LStream interface: 24.5 Mbps bi-directional requirements: Aurora 16/Aurora 8 with Firmware Revision 12 or higher and available LSlot expansion slot
• Size: 3.0"H X 5.0"W X 0.75"D
• EMI certifications: FCC and CE
  
  ADAT Optical I/O
• Number / type: Two inputs and two outputs, compatible with Alesis ADAT Type I and Type II Optical Digital Interface Protocol, up to 24-bit data
• Channels: 16 @ 44.1kHz 48 kHz sample rates, 8 @ 88.2 kHz and 96 kHz sample rates, S/MUX enabled, 4 @ 176.4 kHz and 192 kHz sample rates, SMUX enabled
• Input receiver: Fast-locking phase-locked loop with 30kHz to 55kHz lock range
  
  Clock synchronization
• Clock Sources: Aurora, Optical In 1
  
  Architecture
• Core: FPGA-based core. Support for field upgrades of firmware.
• Routing/Mixing: Integrates with host card's digital mixer to allow independent routing of ADAT I/O with Aurora analog and digital I/O
  
  Connections
• I/O ports: (4) Bracket-mounted TOSLINK connectors.
• Other: LStream interface headers

Lynx LT-ADAT Aurora ADAT card