Bring Royer's legendary smoothness, warmth and power to your live performances.

Royer microphones are built to be tough and can handle the challenges of life on the road, but they are studio mics that require some TLC to keep from damaging the ribbon elements. With the Royer SF-24 ribbon microphone from the Live Series, you get twice the durability in the ribbon element, allowing you to place it anywhere on stage you'd like with complete confidence. Tame high-end harshness and bring Royer's legendary smoothness, warmth and power to your live performances.

How
After extensive testing, Royer found new ribbon thickness for the SF-24 Live microphone that allowed them to significantly increase durability with minimal reduction in gain and transients response. The sonic difference is negligible, and the increased durability lets anyone use Royer ribbons in a live environment.

The Royer SF-24 Live microphone is identified with a red Royer logo (studio models have green or black logos). Live Series mics can be converted to Studio mics with a simple re-ribbon and logo replacement. There is no cost difference between our standard Studio mics and Live mics.

A Figure-8 Microphone on Stage?
Surprisingly, figure-8 ribbon microphones are an excellent solution for bleed. Bleed can be a real problem with many onstage mics—not just the amount of bleed but the quality of the bleed. Here's how Royer handles the problem.

Rejection
Royer ribbon mics are figure-8, picking up sound from the front and rear of the microphone, and rejecting sounds approaching from a) the left and right sides of the mic, b) the top of the mic, and c) the bottom of the mic. These are extremely effective dead zones that engineers use to isolate instruments by positioning the mics in such a way that the dead zones face, and cancel, offending sound sources.

Off-Axis Coloration:
There's a lot of sound on a live stage and you can't entirely control for off-axis information getting into microphones, even ribbons. Most microphones color off-axis information in highly unflattering ways, which is why bleed can sound so nasty. Ribbons don't color off-axis information, so any bleed that manages to get into your onstage Royer SF-24 mic will sound natural, not harsh or colored

Royer SF-24 LIVE Active Ribbon Mic Features:

• Phantom powered circuitry provides high output and impedance matching
• High SPL Capabilities
• No distortion up to maximum SPL rating
• Extremely low residual noise
• Ribbon element is not affected by heat or humidity
• Absence of high frequency phase distortion
• Equal sensitivity from front or back of element
• Consistent frequency response regardless of distance
• Rear side of mic records slightly brighter when three feet or closer to sound source
• Protective wood case
• Microphone sock
• One year ribbon element warranty

Get a studio quality ribbon mic that can handle life on the road! Order yours today!

Royer SF-24 LIVE Active Ribbon Mic