Four complete processors combined into one amazing, all-encompassing master channel strip.

The Summit Audio ECS-410 Everest Configurable Tube Channel Strip takes 4 of the most intense, flavorful audio processing blocks and fuses them into 1 master channel strip.

In addition, the ECS-410 Everest adds the most flexible and easy-to-use routing scheme and a huge array of inputs and outputs in a beautifully crafted 2RU steel chassis.

Simply route from the Summit Audio ECS-410 Everest Channel Strip's Mz2 switchable tube-transistor preamp to the dual mode Dc1 dynamics module and try some sweet sounding LC passive EQ with the Fe1 EQ. Now send the signal to the switchable dual tube/high voltage transistor Db2 DriveBus output for added color—from subtle to intense. Route each section in and out with the touch of a single button with TouchPatch, the original routing design from Summit Audio. Each section of the ECS-410 Everest has its own balanced IO as well, so the Everest really is like adding 4 complete products into your pro audio arsenal.

Summit Audio ECS-410 Everest Configurable Tube Channel Strip Features:

• Mz2 tube or solid state mic preamplifier
• +48VDC phantom power, polarity switch, HPF, pad, 10-segment LED meter
• Fe1 passive 3 band equalizer
• Switch selectable frequencies, +/-12dB per band, peaking/shelving, bypass
• Dc1 dual mode dynamics, "Tight" and "Classic" compression modes
• Sweepable gain, threshold, attack, release, bypass, stereo linking with 2 units, 10 segment LED meter
• Db1 DriveBus output, variable drive and output
• Tube/Solid State/Bypass, VU meter
• TouchPatch routing- 10 routing schemes at the touch of a button
• Each section has independent I/O
• Three 12AX7A/ECC83 vacuum tubes (one Mz2, two Db1)
• 4 complete units in one
• 3 Year Warranty
• Four XLR inputs, four XLR outputs, two 1/4" TRS outputs, side chain, stereo link, insert

This four-section analog processor and microphone preamp is ideal for tracking and processing your most important signals.

Summit Audio ECS-410 Everest Configurable Tube Channel Strip Specifications:

• Mz2- Microphone Preamplifier
• Max gain: +60dB (plus 20dB when routed through the Db2 drive bus output)
• THD+N (@ +30dB): 0.008% (A weighted), 0.01% (unweighted)
• Max Out: +25dB
• Frequency Response: Solid State 10Hz-200kHz +/- 3dB; 15Hz-120K +/-0.5dB
• Tube 15Hz-159K +/-3dB, 0Hz-65Hz +/- 0.5dB
• Input impedance: 2K ohms
• Type: Switchable tube (12AX7A) or discrete transistor
• HPF: 60Hz, 6dB/8va
• Metering: 10 segment LED
• Phantom Power +48VDC
• Pad: -20dB
• Polarity: 0 or 180 degrees
• IO: Balanced XLR mic in, front panel 1/4" Hi-Z in, balanced XLR +4dB (nominal) out, 1/4" TRS -10dB (nominal)
• Fe1- Passive 3 Band Equalizer
• THD+N (@+4dB, no cut or boost): (A weighted) 0.009%, (unweighted) 0.025%
• Frequency Response: 5Hz- 100kHz +/-0.5dB , 5Hz- >200kHz +/-3dB
• Frequencies
• Low 33, 60, 100, 150, 270, 390HZ (peak or shelf)
• Mid 560, 630, 1K, 1.6K, 2.5K, 3.3K Hz
• High 5K, 7.2K, 8.2K, 10K, 12.5K, 16K Hz (peak or shelf)
• Cut/Boost: +/- 12dB per band
• Low shelf: 6dB/8va, peaking bandwidth 2 octaves
• Mid peaking bandwidth: 2 octaves
• High shelf: 6dB/8va, peaking bandwidth 2 octaves
• IO: balanced XLR +4dB in and out
• Dc1- Dual Mode Compressor
• THD+N:
• (@+4dB, with no compression but through gain cell)
• 0.025% (A weighted), 0.041% (unweighted)
• (with 6dB compression)
• 0.013% (A weighted), 0.013% (unweighted)
• Frequency Response: 5dB >200kHz +/- 3dB, 5Hz-136kHz +/-0.5dB
• Gain: -4dB to +10dB
• Attack: variable from
• Release: variable from
• Ratio: Classic Tight
• Metering: 10 segment LED for gain reduction
• IO: Balanced XLR +4dB in and out, 1/4" side chain, 1/4" stereo link
  
  Db2- Drive Bus Master Output and Overdrive
• THD+N (@+4dB, no cut or boost):
• Bypass: 0.002% (A weighted), 0.008% (unweighted)
• Tube: 0.3% to overdrive (unweighted)
• Solid State: 0.013% to overdrive (unweighted)
• Frequency Response:
• Tube
• Solid State 5Hz- > 200kHz +/- 3dB, 5Hz-130kHz +/- 0.5dB
• Gain: +20dB
• Type: Tube (12AX7A) or discrete transistor
• Metering: analog VU output level
• IO: balanced XLR +4dB in and out, -10dB 1/4" TRS out
  
  Physical-
• Size 2RU, 19" x 3.5" x 17"
• Weight 26lb.
• Power requirements 100VAC-240VAC (different fuse for 100V, 115V, and 240V)

Summit Audio ECS-410 Everest Configurable Tube Channel Strip

$3,499.00

MSRP: $3,925.00 Savings: $426.00(10%)

Finance Now for $350/mo.

Availability: In-Stock & Ready To Ship!

Gold Coverage Protection Warranty: (What's this?)

Qty:Add To Cart Add To Wishlist