The bridge between advanced digital features and old world analog quality.

The rackmountable 2192 audio interface combines Universal Audio's long history of creating high-quality, vintage analog gear with its advanced digital technology. With all Class-A analog circuitry providing luscious detail, clarity, warmth, and preserving the character of the original source combined with sample rates up to 192K, realtime transcoding between AES/EBU, S/PDIF, and ADAT, and support for single and dual wire AES modes, this audio interface is sure to impress.

The soul of the 2192 is the analog circuitry used in the A/D/A converters. The 2192 serves as an extremely high-quality digital to analog and analog to digital converter. As a front end for a native workstation, the 2192 audio interface provides 2 channels of sterling sound quality for tracking, monitoring and mastering.

The Universal Audio 2192 also offers tremendous flexibility in signal routing and monitoring. It allows signals to run into the analog inputs, at samples rate ranging from 44.1K to 192K, to be simultaneously output to AES/EBU (single- or dual-wire), S/PDIF, and ADAT (with industry standard S-MUX interleaving for sample rates above 48kHz). The selectable output monitor allows you to monitor any of the digital inputs, or the analog input with no interruption of the transcoding.

Universal Audio 2192 Master Audio Interface Features:

• DC-coupled, fully dual-differential, matched-FET, all discrete Class-A, analog signal path
• Ultralow noise 44.1kHz — 192kHz A/D/A converters
• Low-jitter internal clock source provides 44.1, 48, 88.2, 96, 176.4, and 192kHz sampling rates
• No capacitors in the signal path to degrade sound quality or introduce phase distortion
• 2 channel ADAT S-MUX I/O for 44.1 to 48kHz transmission of 44.1 to 192kHz audio
• 2 channel transformer coupled AES/EBU I/O (44.1kHz — 192kHz)
• Support for single- and dual-wire AES/EBU at 96 and 192kHz rates
• 2 Channel transformer coupled S/PDIF I/O (44.1kHz — 192kHz)
• Realtime transcoding between digital formats
• Independent digital and analog output routing
• 4 parallel 75 ohm BNC Word Clock outputs for jitter-free and reflection-free clock distribution
• 2 separate 75 ohm BNC Word Clock inputs capable of synchronizing to 1x house clocks while running at higher 2x and 4x sample rates
• Front panel Sync-Lock indicator
• Sturdy front panel rotary switches provide Clock, Sample Rate, Analog
• Output and Digital Output source selection
• Full 24-bit digital signal path throughout
• No digital processing of the audio signal
• Multi-segment LED bargraph metering on all analog inputs and outputs, with timed peak-hold digital overload (input) and digital peak (output)
• indicators
• Internal universal auto-sensing, filtered, multi-stage regulated power supply supports 100-240VAC and 50-60Hz power for trouble-free operation world-wide
• Rugged 1U rackmount steel chassis

Hear every detail; capture every nuance. Order yours now.

Universal Audio 2192 Master Audio Interface Specifications:

• Analog
• Inputs: 2 XLR female connectors; DC coupled, dual-differential; Common-mode rejection ratio (CMRR): >90dB; Impedance: ~1.5k ohms; Maximum input level: +31dBu
• Outputs: 2 XLR male connectors; DC coupled, dual-differential; Impedance: ~95ohms; Maximum output level: +23dBu
• Frequency Response (analog input to ADC to DAC to analog output,
• referenced to 1kHz, Fs = 192kHz): +- 0.1dB, 10Hz to 40kHz, -1dB at 74kHz
• Analog Level Trim
• ADC input (Lo-Z source): Max input for 0dBFS: +30dBu; Min input for 0dBFS: +5.5dBu (3dBV)
• DAC output (Hi-Z load): Max output at 0dBFS: +23dBu; Min output at 0dBFS: +4dBu (+1.8dBV)
• Factory trim: Headroom: +18dB; Reference level: +4dBu = -18dBFS; Max input/output at 0dBFS: +22dBu
• Trim accessed via 15-turn, rear-panel mounted potentiometer
  
  Conversion
• A/D: Dynamic range (measured using -38dBu = -60dBFS input at 1kHz, 118dB (A-weighted), 115dB (unweighted); Frequency response (relative to 1kHz): +- 0.02dB, 10Hz to 20kHz @ Fs = 44.1kHz; +- 0.04dB, 10Hz to 40kHz @ Fs = 96kHz; Phase response: <0.1 degrees, 10Hz to 1kHz, -1.0 degrees at 20kHz; Residual noise (200Hz-20kHz): < -145dBFS (-123dBu); THD+N (measured at 1kHz): -110dB, with +4dBu input, -114dB, with -10dBu input
• D/A: Dynamic range (measured with -60dBFS = -38dBu output at 1kHz, 122dB (A-weighted), 119dB (unweighted); Frequency response (relative to 1kHz): +- 0.03dB, 10Hz to 20kHz @ Fs = 44.1kHz, +- 0.04dB, 10Hz to 20kHz @ Fs = 96kHz; Phase response: <0.5 degrees, 10Hz to 1kHz, -10 degrees at 20kHz; Residual noise (200Hz-20kHz): < -145dBFS (-123dBu); THD+N (measured at 1kHz): -98dB, with +4dBu output, -103dB, with -10dBu output
  
  Clock
• Sample Rate (internal): 44.1, 48, 88.2, 96, 176.4, 192 kHz; Sample rate (external): +- 12.5% vari-speed lock at all rates; 4x BNC Clock Outputs: 75 ohm, 5V CMOS drive 2x BNC Clock Inputs: 75 ohm internal termination, AC coupled, 1.2V(p-p) minimum, 5V(p-p) maximum, 50mA maximum over-voltage current (20 ohms/volt); BNC Clock In to Clock Out Delay: 50ns maximum, Negative edge aligned when synchronized at multiple or submultiple rate
  
  Digital
• 2-Channel S/PDIF; Dual stacked RCA; Unbalanced, transformer driven output; AC coupled input
• 2-Channel AES/EBU: Transformer isolated, balanced XLR (x4), Single wire and dual-wire modes (for sample rates above 48kHz)
• AES/SPDIF input bits: SCMS: Ignored; Preempahsis: Ignored; Professional/consumer: Ignored
• AES/SPDIF output bits: SCMS: Not set; Preempahsis: Not Set; Professional/consumer: Set to Professional
• 2-Channel ADAT Optical: Dual incline optical TX/RX (reinforced)
  
  Physical
• Dimensions: (19" W, 1.75" H, 12.5" D) 1 RU standard 19" rack mount chassis; 11-1/2" depth behind front panel; 1" front panel clearance; 17" chassis width
• Thermal: 0 degrees C to 50 degrees C
• AC Line: ICE pin power (safety ground ties to chassis at entry point); 100-240VAC, 50-60Hz, auto-sensing; 40W

Universal Audio 2192 Master Audio Interface

Universal Audio 2192 Master Audio Interface