Legendary Crown quality at an easy price.

The Crown XLS 202D Power Amplifier is designed to provide the quality, power, and reliability you expect from Crown. It boasts many of the same controls and features as other Crown amps for a much friendlier price. 330W/ch @ 2 ohms, 300W/ch @ 4 ohms, 200W/ch @ 8 ohms, 660W bridged mono @ 4 ohms, 600W bridged mono @ 8 ohms.

The Crown XLS power amp boasts sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and XLR inputs and Speakon or binding post outputs; all in a rugged steel chassis designed to handle serious road use.

Crown XLS 202D Power Amplifier - Used Features:

• Features sophisticated protection circuitry
• 5-way fault indicator
• Red peak clip LED on each channel
• Green signal-present LED that flashes when the level is extremely low
• Detented level controls
• Mode select switch for stereo or bridged
• 3-speed fan
• XLR inputs; touch-proof binding post and Speakon outputs
• Rugged steel chassis designed to handle serious road use.
• 3-year no-fault warranty

Only a click or two stands between you and torrents of clean Crown power. Order yours today!

Crown XLS 202D Power Amplifier - Used Specifications:

• Performance
• Sensitivity (volts RMS) for full rated power at
• 4 ohms: 1.25V
  
  Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, —0.8 dB
  
  Signal-to-Noise Ratio (20Hz-20kHz)
  
  A-weighted, below rated power: > 98dB
  
  No weighting, below rated power: > 93dB
  
  Total Harmonic Distortion (THD): < 0.5%
  
  Intermodulation Distortion (IMD): (60Hz and 7kHz at 4:1) from full rated output
• to —40dB: < 0.3%
  
  Damping Factor (8 ohm) 10Hz to 400Hz: >200
  
  Crosstalk (below rated power): at 1 kHz: —76 dB - at 20 kHz: —58 dB
  
  Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
  
  Load Impedance: Rated for 4 to 8 ohms per channel in Stereo, 8 ohms in Bridge Mono
  
  AC Line Voltage and Frequency Configurations: Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC Mode Switch
  
  Backpanel switch selects Dual or Bridge-Mono mode
  
  Indicators
  
  Signal Presence Indicators: Two green LEDs

Crown XLS 202D Power Amplifier - Used

We're sorry, this product has been discontinued.

Item Note:

Gold Coverage Protection Warranty: (What's this?)